Softaajille vuodesta 2002
Varusteleka.fi
Tänään on La Huhti 27, 2024 9:34 pm

Kaikki ajat ovat UTC




Aloita uusi ketju Vastaa viestiin  [ 5 viestiä ] 
Kirjoittaja Viesti
 Viestin otsikko: Taittoperä Spetsnaziin
ViestiLähetetty: To Huhti 19, 2007 4:09 pm 
Poissa

Liittynyt: To Huhti 19, 2007 3:09 pm
Viestit: 2
Olen rakentamassa Beta Spetsnaziini taittoperää, löysin sopivan Trapper Indrustiesta.
Kuinka sieltä tilataan? Ja toimittaako Suomeen?
http://www.trapperindustries.com/airsoft/page12.html taittoperä on toinen ylhäältä.
Pitääkö Spetsnazin vakiorunko vaihtaa?
Onko uudelleenjohdotus helppoa, kun large-akun teippaaminen olisi aika karun näköstä?


Ylös
 Profiili  
 
 Viestin otsikko:
ViestiLähetetty: To Huhti 19, 2007 5:07 pm 
Poissa

Liittynyt: Ke Joulu 20, 2006 5:11 pm
Viestit: 288
Paikkakunta: Espoo
Mikset vain saman tien laittaisi tälläistä taittoperää minkä saat suoraan suomesta.


Ylös
 Profiili  
 
 Viestin otsikko:
ViestiLähetetty: To Huhti 19, 2007 5:11 pm 
Poissa

Liittynyt: Su Loka 29, 2006 3:47 pm
Viestit: 42
Paikkakunta: Rovaniemi
Koska Varustelekan osa on oikeaan Anna Kaisaan, tuolla sivustolla olevat airsoft aseisiin ainakin osoiterivin perusteella


Ylös
 Profiili  
 
 Viestin otsikko:
ViestiLähetetty: To Huhti 19, 2007 5:21 pm 
Poissa

Liittynyt: Ti Maalis 22, 2005 1:21 pm
Viestit: 366
Paikkakunta: Kuopio
Kyllähän nuita oikeita AnnaKaisan osia saa airsoft AnnaKaisaankin laitettua. Tämä vaatii vain välineet ja taitoa.


Ylös
 Profiili  
 
 Viestin otsikko:
ViestiLähetetty: To Huhti 19, 2007 5:35 pm 
Poissa

Liittynyt: To Helmi 06, 2003 6:59 pm
Viestit: 2694
Paikkakunta: Oita, Japan
Nimi: Petri P.
Lukiko teistä kukaan, mukaanlukien ketjun aloittaja tuota sivua, jonka ketjun aloittaja vielä itse laittoi?

Lainaa:
These kits are supplied to fit the folding stock type frame found on the Marui AK47s under folder, They are easily fitted and can be supplied as either left or right hand folding types (please specify when ordering). They have a push button type release found on the hinge part of the stock and tightly lock into position when folded or open.
Constructed from steel.
fstockkit1.jpg

Fitting is easy but if you do not want to do it yourself then we can fit it for you if you send us the gun or just the receiver.
Simple steps:

1. Strip down the original weapon to leave an empty receiver.

2. Remove old under folding stock parts

3. Line up the new stock kit to the back of the receiver, mark the hole using the guide hole at the back of the hinge, drill a 5 mm hole.

4. Attach stock using the screw supplied

5. Fill holes in receiver with a flexible auto body filler and then paint black

6. Refit all parts to receiver

We can supply the folding type Marui receivers if required.


Lisäksi:

Lainaa:
We ship worldwide with some exceptions please e mail to check.


http://www.trapperindustries.com/page2.html

Vielä lisäksi!

Lainaa:
We can accept payment by Master card, Visa and Switch. Either by e mail or by telephone.
We are happy to accept Paypal.

All of our prices are in UK. Pounds Sterling.
Major international currencies are welcome, please e mail us for rates.

All payments by cheque or cash should be sent to the address below and marked Dept ‘AS’. (Please if you are sending cash use registered post)

Trapper Industries Ltd
Unit 12
Stockwell Center
Stephenson Way
Crawley
Sussex
RH10 1TN

Please make cheques payable to ‘Trapper Industries Ltd’ and add postage and packing to the items required (some items prices include P&P).

We welcome e mails to check delivery times. We carry a large stock of many items and delivery times are marked where needed. Normally delivery is dispatched straight after clearing of payment.

If you are dissatisfied with any item a full refund will be given without fuss for 28 days after purchase.

We are happy to ship worldwide with only a few exceptions. Please make sure that what you order is legal in your country and your country is not on the forbidden list for the UK or Russia.

If ordering air weapons in the UK please state that you are over 17 years old.


Ordering

Lukekaa nyt herran jumala vähän ennenkuin kysytte! Jos tämän jälkeen on jotain epäselvää, kantsii varmaan mailata noille. Osoite on vielä varmuuden vuoksi sitten seuraava: trapper_industries@hotmail.com


Ylös
 Profiili  
 
Näytä viestit ajalta:  Järjestä  
Aloita uusi ketju Vastaa viestiin  [ 5 viestiä ] 

Kaikki ajat ovat UTC


Paikallaolijat

Käyttäjiä lukemassa tätä aluetta: Ei rekisteröityneitä käyttäjiä ja 60 vierailijaa


Et voi kirjoittaa uusia viestejä
Et voi vastata viestiketjuihin
Et voi muokata omia viestejäsi
Et voi poistaa omia viestejäsi

Etsi tätä:
Hyppää:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
Käännös, Lurttinen, www.phpbbsuomi.com